Our company has developed a 2.0 version of energy-saving fermentation tank, which uses four major energy-saving technologies to achieve effective energy saving of 40%. Taking manure with a water content of 75% as an example, the power consumption per ton of the 2.0 energy-saving version is reduced from about 60 degrees to about 35 degrees compared to the 1.0 version.
Equipment Introduction:
The whole equipment structure is divided into three parts, the lower part of the base part of the distribution of hydraulic stations, scroll air pumps, cylinders, heating systems and mixing shafts, etc.; the middle of the double-layer insulated tanks, equipment, automatic control systems, export devices, etc., the inner wall of the tank is lined with 304 stain less steel plate, eFectively extend the life of the tank and reduce the residue of rotting matte, the middle of the polyurethane foam filled with thermal insulation, 1e outer wall of the thicken ing of the steel sheet as a support! Tank: the upper part is composed of wind and rain shed, testing platform and exhaust facilities and other devices. Attached equipment includes automatic bucket elevator, exhaust gas filtering and deodorizing system and heat exchange system.
Process Principle:
Livestock and poultry manure added to the fermentation equipment in the closed warehouse, through intelligent microorganisms aerobic fermentation at h‹gh temperature, rapid degradation of manure odor and harmful substances, transformed inta soil-friendly organic matter. The temperature during the fermentation process can reach 65-75°C, which can ePectively kill insect eggs and pathogenic bacteria, and achieve the ePect of harmless treatment. The high quality organic fertilizer produced after fermentation and maturation reaches the quality standard of organic fertilizer NY52S-2021. The equipment realizes elective energy saving of 4096 through the four major energy-saving technologies of the three instrument fermenter, which is in the leading position among the similar products.
Process Advantages:
Low operating costs
Utilizing aerobic bacteria high-temperature fermentation technolo- gy, the treatrrtent of feces and garbage is short and the running cost
Short fermentation cycle
Only about 15 days far a fermentation cycle, can realize the resource utilization; cycle processing, daily into the manure, daily out of fertilizer.
Standardized production
Real-time disp!aY and recording of process parameters, can accurately control each link to achieve production standardization.
Smatl footprint
A single unit requires only 70-105 •9uare meters of floor space (depending an the model).
Environmental comptiance
Bialogical deodorîzatian equipment multi-layer filtration, ta achieve the gas discharge standards, does nat praduce seœndary pollution.
High degree of automation
PLC control equipment, Öne persan œntrol can complete the whale process of fermentation treatment.
Application:
It is suitable for the harmless treatment and resource utilization of organic waste such as chicken manure/dry clean pig manure/sot- id-liquid separation solid manure/sludge/kitchen waste.
Sanyi Group was founded in December 1998. Its industries cover animal husbandry and environmental protection, animal health, feed additives, biological veterinary drugs, diagnostic preparations, biological feed and other fields. It currently has three production parks, located in Dalian, Liaoning, Xuzhou, Jiangsu, and Heze, Shandong .
Heze Sanyi was established in March 2012, focusing on three major industrial sectors: pasture environmental protection, pasture disinfection, and new feed additives. It is a wholly-owned subsidiary of Sanyi Group, with 120 employees and a factory area of 55,000 square meters.
Exhibitions and Our Customers
Certifications and Partners
1. Q: What fields is the high temperature aerobic fermentation tank mainly used in?
A: The high temperature aerobic fermentation tank can be used for Livestock and poultry manure (pig manure/chicken manure/cow manure) composting, organic waste (straw and garden waste) recycling, municipal sludge, kitchen waste and fruit and vegetable waste.
2. Q: What information do we need before ordering?
A1: Pls advise your requirements for overall treatment process.
A2: Pls offer the material quality report for material type.
A3: Pls advise the max treatment capacity for design.
A4: Pls advise the final product quality report or final product use
3. Q: How long is your lead time?
A: Generally it is 20 days, depends on your needs and project scales.
4. Do you provide OEM service?
A: We provide high-quality OEM services, and also provide buyers customized products.
5. What other services can you provide?
A: Provide free technical support at any time, and also can help you design the whole treatment process of the project
Audited Supplier 
){kind=link}